                            |
|
C-5500 :
Loin puller
(If the film does not start properly, click here to download
it)
Designed to
remove skin on the back fat of a bone, the Loin Puller is manually controlled by a joystick adjusted by an operator viewing the
loin through the machine, or by a sophisticated vision system controlling knife position. The vision system will be able to receive instructions and
take decisions about the thickness of the fat staying on a particular type
of loin (size of muscle, color, etc.)The "U" shape knife is easily removable
and uses disposable blades that can be easily changed whitin few minutes.
Construction :
-
SS 304 frame, the ajustables parts are also
made of SS.
-
electric motor coupled with two speed reducers
-
ss chains and sprockets with a variable frequency
drive.
-
Hydraulic and pneumatic components
enclosed in a ss box -
A NEMA 4X control box holds all the
electrical components and is supplied with switches and circuit breaker.
-
All mechanical parts are located on
the side of the main conveyor.
-
Security switches, shields and covers
are added for personal safety. -
SS Bearings
with nylon parts and polymer housing.
-
The equipment can be run in automatic or manual mode:
Options :
Vision system including :
- PLC controller Omron
- Industrial computer with acquisition
card ans camera
Task performed by the future vision
system :
- Acquire pictures of the loin's side
- Process the images to determine the
thickness of the fat
- transfer the datas to the knife's hydraulic
valve to set the cutting depth
Hydraulic power unit : 5
H.P. integrated to the machine
Technical datas :
- Width :16 in. (36 in. with vision
system)
- Length : 84 in. (108in. with vision
system)
- Std Height : 84 in.
- Approx. Weight : 880 lbs (2200 lbs
with the vision system)
Consumption :
- Air : 2 Scfm @ 100 psi
- Hydraulic : 2 gpm @ 1000 psi
- Electricity : 15 A @ 120 V; 7.5 H.P.
on high voltage
(Click on the picture to enlarge it)
|
