H-5208 :
Dehairing machine

In these machines, hogs of all sizes are supported on "U" bars and cleaned by hogs scrapers bolted on two shafts assuring their rotation. We recommend to install one dehairing machine for an operation of 200 hogs per hour and less or for higher speed. We also suggest to install two dehairing machines in series with opposite rotations to scrap hogs on both side equally. A minimum of warm water is required to drop hair in the hair removal conveyor. Outside, heavy duty bearings insure an easy maintenance and doors are installed to facilitate the washing period. The exit doors are hydraulically operated to control the dehairing time. Scrapers and U-bars are installed like a screw to allow hogs to go trough the machine naturally.

Construction :

• Heavy duty SS 304 or painted steel frame.

• Heavy duty steel shafts made of pipes with welded attachments.

• Downer shaft directly coupled to an electric motor with a speed reducer.

• Entrance, transfer or exit stainless chute

• Third shaft with whips with reverse rotation

• Walkway and stairs

• Separate drives

• Recycled water tank
   

• Width :  64 in.

• Length : 11 to 20 ft.

• Height : 94 in. without legs

• Weight : 8000 to 17000 lbs.

• Hydraulic : 1 gpm @ 1000 psi

• Electricity : To determined with selection

• Water : 3 gpm @ 130 F

(Click on the picture to enlarge it)